// CODE SNIPPET
3308.6.4 Identification of Nets
JUMP TO FULL CODE CHAPTER
Structural netting shall be identified in accordance with Section 7 of ANSI/ASSE A10.11. Debris netting shall be identified by a letter or other documentation from the manufacturer stating the description and model. The identification for structural netting and debris netting shall be kept at the site until the netting is removed.
Related Code Sections
3308.6.4 Safeguards During Construction or Demolition, Identification of Nets
documentation from the manufacturer stating the description and model. The identification for structural netting and debris netting shall be kept ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3308 Protection of Unenclosed Perimeters > 3308.6 Horizontal Safety Netting Systems > 3308.6.4 Identification of Nets
Appendix A Selected Rules of the Department of Buildings [PDF] (page 75)
a fifty hour salt spray test in accordance with ASTM B-1117. (2) Identification of nets. Each structural net shall be permanently labeled ...
1007.6.5 Means of Egress, Identification
Each door providing access to an area of rescue assistance from an adjacent floor area shall be identified by a sign complying with ICC A117.1 ...
NYC Building Code 2008 > 10 Means of Egress > 1007 Accessible Means of Egress > 1007.6 Areas of Rescue Assistance > 1007.6.5 Identification
1107.7.3 Refrigeration, Identification
Stop valves shall be identified where their intended purpose is not obvious. Numbers shall not be used to label the valves, unless a key ...
NYC Mechanical Code 2008 > 11 Refrigeration > 1107 Refrigerant Piping > 1107.7 Stop Valves > 1107.7.3 Identification