// CODE SNIPPET

R308.1.1 Identification of Multiple Assemblies

Residential Code 2015 of Utah > 3 Building Planning > R308 Glazing > R308.1 Identification > R308.1.1 Identification of Multiple Assemblies

JUMP TO FULL CODE CHAPTER

Multi-pane assemblies having individual panes not exceeding 1 square foot (0.09 m²) in exposed area shall have not less than one pane in the assembly identified in accordance with Section R308.1. Other panes in the assembly shall be labeled "CPSC 16 CFR 1201" or "ANSI Z97.1" as appropriate.

Related Code Sections

R308.1.1 Building Planning, Identification of Multiple Assemblies

Multi-pane assemblies having individual panes not exceeding 1 square foot (0.09 m 2 ) in exposed area shall have not less than one pane ...

Residential Code 2015 of Utah > 3 Building Planning > R308 Glazing > R308.1 Identification > R308.1.1 Identification of Multiple Assemblies

R904.4 Roof Assemblies, Product Identification

Roof covering materials shall be delivered in packages bearing the manufacturer's identifying marks and approved testing agency labels required ...

Residential Code 2015 of Utah > 9 Roof Assemblies > R904 MATERIALS > R904.4 Product Identification

722.5.1.3.2 Fire and Smoke Protection Features, Identification

Sprayed fire-resistant materials shall be identified by density and thickness required for a given fire-resistance rating ...

Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 722 Calculated Fire-Resistance > 722.5 Steel Assemblies > 722.5.1 Structural Steel Columns > 722.5.1.3 Sprayed Fire-Resistant Materials > 722.5.1.3.2 Identification

722.5.1.3.2 Fire and Smoke Protection Features, Identification

Sprayed fire-resistant materials shall be identified by density and thickness required for a given fire-resistance rating ...

Building Code 2018 of Utah > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.5 Steel assemblies > 722.5.1 Structural steel columns > 722.5.1.3 Sprayed fire-resistant materials > 722.5.1.3.2 Identification

1703.5.2 Special Inspections and Tests, Inspection and identification

that is to be labeled . The inspection shall verify that the labeled product, material or assembly is representative of the product, material or assembly tested ...

Building Code 2018 of Utah > 17 Special Inspections and Tests > 1703 Approvals > 1703.5 Labeling > 1703.5.2 Inspection and identification

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes