// CODE SNIPPET
1910.303(e)(1) Identification of Manufacturer and Ratings
JUMP TO FULL CODE CHAPTER
Electric equipment may not be used unless the following markings have been placed on the equipment:
The manufacturer's name, trademark, or other descriptive marking by which the organization responsible for the product may be identified; and
Other markings giving voltage, current, wattage, or other ratings as necessary.
Related Code Sections
1910.303(e)(1) Electrical, Identification of Manufacturer and Ratings
markings giving voltage, current, wattage, or other ratings as necessary ...
OSHA 1910 General Industry > S Electrical > 1910.303 General > 1910.303(e) Marking > 1910.303(e)(1) Identification of Manufacturer and Ratings
1910.184(i)(1) Materials Handling and Storage, Sling Identification
Each sling shall be marked or coded to show the rated capacities for each type of hitch and type of synthetic web material ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(i) Synthetic Web Slings > 1910.184(i)(1) Sling Identification
1910.265(c)(6)(ii) Special Industries, Identification
Exits shall be located and identified in a manner that affords ready exit from all work areas ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(c) Building Facilities, and Isolated Equipment > 1910.265(c)(6) Emergency Exits Including Doors and Fire Escapes > 1910.265(c)(6)(ii) Identification
1910.308(d)(4) Electrical, Identification
Fire alarm circuits shall be identified at terminal and junction locations in a manner that will prevent unintentional interference with the signaling ...
OSHA 1910 General Industry > S Electrical > 1910.308 Special Systems > 1910.308(d) Fire Alarm Systems > 1910.308(d)(4) Identification
1910.133(a)(4) Personal Protective Equipment,
Eye and face PPE shall be distinctly marked to facilitate identification of the manufacturer ...
OSHA 1910 General Industry > I Personal Protective Equipment > 1910.133 Eye and Face Protection > 1910.133(a) General Requirements > 1910.133(a)(4)