// CODE SNIPPET
(4) Identification of Fuse Mountings and Fuse Units
Related Code Sections
(4) Equipment for General Use, Identification of Fuse Mountings and Fuse Units
Fuse mountings and fuse units shall have permanent and legible nameplates showing the manufacturer's type or designation, continuous current rating ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.21 Circuit-Interrupting Devices > (B) Power Fuses and Fuseholders > (4) Identification of Fuse Mountings and Fuse Units
(5) Special Occupancies, Fuses
to overloading in normal use shall be permitted to be mounted in general-purpose enclosures if each such fuse is preceded by a switch complying ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 501 Class I Locations > 501.105 Meters, Instruments, and Relays > (B) Class I, Division 2 > (5) Fuses
(B) Wiring and Protection, Fuses
If a switch and fuse combination is used, the fuses employed shall be capable of interrupting any current higher than the interrupting capacity ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 230 Services > 230.95 Ground-Fault Protection of Equipment > (B) Fuses
(2) Wiring and Protection, Fuses
A fuse shall be connected in series with each ungrounded conductor ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.100 Feeders and Branch Circuits > (A) Location and Type of Protection > (2) Fuses