// CODE SNIPPET
712.25 Identification of Circuit Conductors
Related Code Sections
712.25 Special Conditions, Identification of Circuit Conductors
Ungrounded circuit conductors in dc microgrids shall be identified according to the requirements of 210.5(C)(2) for branch circuits and 215.12(C)(2 ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 712 Direct Current Microgrids > 712.25 Identification of Circuit Conductors
(2) Wiring and Protection, Branch Circuits Supplied From Direct-Current Systems
identification methods utilized for conductors originating within each branch-circuit panelboard or similar branch-circuit distribution equipment shall ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.5 Identification for Branch Circuits > (C) Identification of Ungrounded Conductors > (2) Branch Circuits Supplied From Direct-Current Systems
(1) Special Equipment, Identification
PV system dc circuit conductors shall be identified at all termination, connection, and splice points by color coding, marking tape, tagging ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.31 Wiring Methods > (B) Identification and Grouping > (1) Identification
(C) Special Equipment, Conductor Identification
All feeders and branch-circuit conductors installed under this section shall be identified as to system at all splices and terminations by color ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 647 Sensitive Electronic Equipment > 647.4 Wiring Methods > (C) Conductor Identification
410.69 Equipment for General Use, Identification of Control Conductor Insulation
Where control conductors are spliced, terminated, or connected in the same luminaire or enclosure as the branch-circuit conductors, the field ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.69 Identification of Control Conductor Insulation