// CODE SNIPPET
[F] 909.18.9 Identification and Documentation
JUMP TO FULL CODE CHAPTER
Charts, drawings and other documents identifying and locating each component of the smoke control system, and describing its proper function and maintenance requirements, shall be maintained on file at the building as an attachment to the report required by Section 909.18.8.3. Devices shall have an approved identifying tag or mark on them consistent with the other required documentation and shall be dated indicating the last time they were successfully tested and by whom.
Related Code Sections
909.18.9 Fire Protection and Life Safety Systems, Identification and Documentation
Charts, drawings and other documents identifying and locating each component of the smoke control system, and describing its proper function ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.18 Acceptance Testing > 909.18.9 Identification and Documentation
(D) Wiring and Protection, Grounded Conductors of Different Systems
each system grounded conductor. The means of identification shall be documented in a manner that is readily available or shall be permanently posted ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 200 Use and Identification of Grounded Conductors > 200.6 Means of Identifying Grounded Conductors > (D) Grounded Conductors of Different Systems
R406.6.2 [RE] Residential Energy Efficiency, Compliance Report
compliance documentation shall include the following information: Address or other identification of the residential building. An inspection checklist ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [RE] Residential Energy Efficiency > R406 Energy Rating Index Compliance Alternative > R406.6 Documentation > R406.6.2 Compliance Report
2403.1 Glass and Glazing, Identification
Each pane shall bear the manufacturer's mark designating the type and thickness of the glass or glazing material. The identification shall ...
Building Code 2018 of Illinois > 24 Glass and Glazing > 2403 General Requirements for Glass > 2403.1 Identification
R405.4 [RE] Residential Energy Efficiency, Documentation
Documentation of the software used for the performance design and the parameters for the building shall be in accordance with Sections R405.4.1 ...
2018 Illinois Energy Conservation Code Standards for Privately Funded Commercial Facilities and Standards for Residential Buildings > 4 [RE] Residential Energy Efficiency > R405 Simulated Performance Alternative (Performance) > R405.4 Documentation