// CODE SNIPPET
P-904.4.3 House Drain Size
Related Code Sections
P-904.4.3 Soil and Waste Piping, House Drain Size
The size of the house drain is determined by its gradient fall and total number of fixture-units ...
Philadelphia Plumbing Code > 9 Soil and Waste Piping > P-904 Sizes > P-904.4 Maximum Fixture-Unit Load > P-904.4.3 House Drain Size
P-1006.4 Storm Water Drainage Piping, Combined Drainage Piping
The size of the combined house drain shall be obtained from Table P-1006.1, by adding to the square feet of storm water drainage ...
Philadelphia Plumbing Code > 10 Storm Water Drainage Piping > P-1006 Size of Leaders and Storm Drains > P-1006.4 Combined Drainage Piping
P-919.2.7 Vents, Building Drain/Building Sewer Size
The size of the house drain is determined by its gradient fall and total number of fixture units ...
Plumbing Code 2018 of Philadelphia > 9 Vents > P-919 Philadelphia Single-Stack Waste and Vent System > P-919.2 Drainage System Sizing > P-919.2.7 Building Drain/Building Sewer Size
P-919.2.4 Vents, Maximum Fixture-Unit Load
The maximum number of fixture units connected to a given size of house drain, horizontal branch, or vertical soil or waste stack, shall be determined ...
Plumbing Code 2018 of Philadelphia > 9 Vents > P-919 Philadelphia Single-Stack Waste and Vent System > P-919.2 Drainage System Sizing > P-919.2.4 Maximum Fixture-Unit Load
P-502.1 Traps, Cleanouts, Interceptors, and Backwater Valves, Size
The house trap shall not be less in size than the house drain pipe it traps, and in no case less than 5 inches for sanitary or combination sewers ...
Philadelphia Plumbing Code > 5 Traps, Cleanouts, Interceptors, and Backwater Valves > P-502 House Traps and Fresh Air Inlets > P-502.1 Size