// CODE SNIPPET
E303.2.5 Hot Weather Placing and Finishing
JUMP TO FULL CODE CHAPTER
All concrete shall be placed and finished in accordance with the provisions of ACI 301, Specifications for Structural Concrete for Buildings. When necessary, provision for wind breaks, shading, fog spraying, sprinkling, ponding or wet covering with a light colored material shall be made in advance of placement, and such protective measures shall be taken as quickly as concrete hardening and finishing operations will allow.
Related Code Sections
E303.2.5 Florida Standard for Radon-Resistant New Commercial Construction, Hot Weather Placing and Finishing
All concrete shall be placed and finished in accordance with the provisions of ACI 301, Specifications for Structural Concrete for Buildings . When ...
2017 FBC - Building, 6th edition > E Florida Standard for Radon-Resistant New Commercial Construction > E303 Concrete Floors in Contact With Soil Gas. > E303.2 Concrete for Slabs > E303.2.5 Hot Weather Placing and Finishing
1405.10.1.7 Exterior Walls, Hot Weather Construction
Hot weather construction of adhered masonry veneer shall comply with the requirements of Section 2104 ...
2017 FBC - Building, 6th edition > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.10 Adhered Masonry Veneer > 1405.10.1 Exterior Adhered Masonry Veneer > 1405.10.1.7 Hot Weather Construction
2104.4 Masonry, Hot Weather Construction
The hot weather construction provisions of TMS 602/ACI 530.1/ASCE 6, Article 1.8 D, shall be implemented when the ambient air temperature exceeds 100 ...
Section R903 Roof Assemblies, Weather Protection
required for roof drainage, scuppers shall be placed level with the roof surface in a wall or parapet. The scupper shall be located as determined by the roof ...