// CODE SNIPPET
P-814.1 Hot Water Systems
JUMP TO FULL CODE CHAPTER
Check valves shall not be installed anywhere in the cold water supply pipe leading to an
existing water heating system unless:
- Suitable pressure relief valves and temperature relief valves are also installed; and
- Where copper tanks are used, a suitable vacuum relief valve is installed at or adjacent to the copper tank.
Related Code Sections
P-814.1 Water Supply and Distribution, Hot Water Systems
Check valves shall not be installed anywhere in the cold water supply pipe leading to an
existing water heating system unless:
Suitable pressure ...
Philadelphia Plumbing Code > 8 Water Supply and Distribution > P-814 Check Valves > P-814.1 Hot Water Systems
R403.5 [RE] Residential Energy Efficiency, Service Hot Water Systems
Energy conservation measures for service hot water systems shall be in accordance with Sections R403.5.1 through R403.5.4 ...
Philadelphia Energy Conservation Code > 4 [RE] Residential Energy Efficiency > R403 Systems > R403.5 Service Hot Water Systems
C503.5 [CE] Existing Buildings, Service Hot Water Systems
New service hot water systems that are part of the alteration shall comply with Section C404 ...
Philadelphia Energy Conservation Code > 5 [CE] Existing Buildings > C503 Alterations > C503.5 Service Hot Water Systems
R502.1.1.3 [RE] Existing Buildings, Service Hot Water Systems
New service hot water systems that are part of the addition shall comply with Section R403.5 ...
Philadelphia Energy Conservation Code > 5 [RE] Existing Buildings > R502 Additions > R502.1 General > R502.1.1 Prescriptive Compliance > R502.1.1.3 Service Hot Water Systems
R503.1.3 [RE] Existing Buildings, Service Hot Water Systems
New service hot water systems that are part of the alteration shall comply with Section R403.5 ...
Philadelphia Energy Conservation Code > 5 [RE] Existing Buildings > R503 Alterations > R503.1 General > R503.1.3 Service Hot Water Systems