// CODE SNIPPET
41.3.6* Hot Tapping
Related Code Sections
41.3.6* Welding, Cutting, and Other Hot Work, Hot Tapping
Hot tapping or other cutting and welding on a flammable gas or liquid transmission or distribution utility pipeline shall be performed by a crew ...
Fire Code 2018 of West Virginia > 41 Welding, Cutting, and Other Hot Work > 41.3 Fire Prevention Precautions > 41.3.6* Hot Tapping
P3003.2 Sanitary Drainage, Prohibited Joints
Running threads and bands shall not be used in the drainage system. Drainage and vent piping shall not be drilled, tapped, burned or welded. The ...
Residential Code 2015 of West Virginia > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.2 Prohibited Joints
(B) Wiring Methods and Materials, Taps
Taps shall be made between any phase conductor and the grounded conductor or any other phase conductor by means of devices and fittings identified ...
National Electrical Code 2017 of West Virginia > 3 Wiring Methods and Materials > 322 Flat Cable Assemblies: Type FC > 322.56 Splices and Taps > (B) Taps
(B) Special Equipment, Taps
Where two or more motors are connected to the same branch circuit, each tap conductor to an individual motor shall have an ampacity not less than one ...
National Electrical Code 2017 of West Virginia > 6 Special Equipment > 610 Cranes and Hoists > 610.42 Branch-Circuit Short-Circuit and Ground-Fault Protection > (B) Taps
(B) Wiring and Protection, Feeder Taps
Conductors tapped to a feeder shall be permitted to be protected by the feeder overcurrent device where that overcurrent device also protects the tap ...
National Electrical Code 2017 of West Virginia > 2 Wiring and Protection > 240 Overcurrent Protection > 240.101 Additional Requirements for Feeders > (B) Feeder Taps