// CODE SNIPPET
1910.106(f)(4)(vii) Hoses and Couplings
JUMP TO FULL CODE CHAPTER
All pressure hoses and couplings shall be inspected at intervals appropriate to the service. The hose and couplings shall be tested with the hose extended and using the "inservice maximum operating pressures." Any hose showing material deteriorations, signs of leakage, or weakness in its carcass or at the couplings shall be withdrawn from service and repaired or discarded.
Related Code Sections
1910.106(f)(4)(vii) Hazardous Materials, Hoses and Couplings
All pressure hoses and couplings shall be inspected at intervals appropriate to the service. The hose and couplings shall be tested with the hose ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(f) Bulk Plants > 1910.106(f)(4) Wharves > 1910.106(f)(4)(vii) Hoses and Couplings
1910.107(e)(6)(iii) Hazardous Materials,
All pressure hose and couplings shall be inspected at regular intervals appropriate to this service. The hose and couplings shall be tested ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(e) Flammable Liquids and Liquids With a Flashpoint Greater Than 199.4 °F (93 °C) > 1910.107(e)(6) Pipes and Hoses > 1910.107(e)(6)(iii)
1910.253(b)(5)(i) Welding, Cutting, and Brazing,
Cylinders, cylinder valves, couplings, regulators, hose, and apparatus shall be kept free from oily or greasy substances. Oxygen cylinders ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(b) Cylinders and Containers > 1910.253(b)(5) Operating Procedures > 1910.253(b)(5)(i)
1910.158(e)(1)(ii) Fire Protection,
The employer shall assure that hose on all standpipe systems installed after January 1, 1981, is hydrostatically tested with couplings in place ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(e) Tests and Maintenance > 1910.158(e)(1) Acceptance Tests > 1910.158(e)(1)(ii)
1910.219(i)(2) Machinery and Machine Guarding, Couplings
Shaft couplings shall be so constructed as to present no hazard from bolts, nuts, setscrews, or revolving surfaces. Bolts, nuts, and setscrews ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(i) Collars and Couplings > 1910.219(i)(2) Couplings