// CODE SNIPPET
1910.158(c)(2) Hose Outlets and Connections
JUMP TO FULL CODE CHAPTER
The employer shall assure that hose outlets and connections are located high enough above the floor to avoid being obstructed and to be accessible to employees.
The employer shall standardize screw threads or provide appropriate adapters throughout the system and assure that the hose connections are compatible with those used on the supporting fire equipment.
Related Code Sections
1910.158(c)(2) Fire Protection, Hose Outlets and Connections
The employer shall assure that hose outlets and connections are located high enough above the floor to avoid being obstructed and to be accessible ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(c) Equipment > 1910.158(c)(2) Hose Outlets and Connections
1910.253(e)(4)(v) Welding, Cutting, and Brazing,
If the station outlet is connected directly to a hose, the outlet shall terminate in a union connection complying with the Standard Hose Connection ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(e) Protective Equipment, Hose, and Regulators > 1910.253(e)(4) > 1910.253(e)(4)(v)
1910.110(b)(9)(vii)(e) Hazardous Materials,
Hose used for connecting to wall outlets shall be protected from physical damage ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(b) Basic Rules > 1910.110(b)(9) Hose Specifications > 1910.110(b)(9)(vii) > 1910.110(b)(9)(vii)(e)
1910.158(c)(3)(i) Fire Protection,
The employer shall assure that every 1 1/2 inch (3.8 cm) or smaller hose outlet used to meet this standard is equipped with hose connected and ready ...
OSHA 1910 General Industry > L Fire Protection > 1910.158 Standpipe and Hose Systems > 1910.158(c) Equipment > 1910.158(c)(3) Hose > 1910.158(c)(3)(i)
1910.253(e)(4) Welding, Cutting, and Brazing,
If the station outlet is connected directly to a hose ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(e) Protective Equipment, Hose, and Regulators > 1910.253(e)(4)