// CODE SNIPPET
1406.2.1.6 Hose and Connectors
JUMP TO FULL CODE CHAPTER
Hose and connectors capable of withstanding pressure up to at least 1,000 psig (6895 kPa) and of a design suitable for oxygen service at a pressure of 250 psig (1724 kPa) shall be used to connect the outlets on the service piping to the blowpipes. Hose shall be rejected for use if it shows excessive wear, loose connections, leaks or burns; hose subjected to a flash back in use shall be tested to twice the service pressure, but not less than 200 psig (1379 kPa), before being returned to service.
Related Code Sections
1302.8 Fuel-Oil Piping and Storage, Flexible Connectors and Hoses
Flexible metal connectors and hoses used where rigid connections are impractical or to reduce the effect of jarring and vibration shall be listed ...
NYC Mechanical Code 2008 > 13 Fuel-Oil Piping and Storage > 1302 Material > 1302.8 Flexible Connectors and Hoses
1302.8 Fuel-Oil Piping and Storage, Flexible Connectors and Hoses
Flexible metal connectors and hoses used where rigid connections are impractical or to reduce the effect of jarring and vibration shall be listed ...
NYC Mechanical Code 2014 > 13 Fuel-Oil Piping and Storage > 1302 Material > 1302.8 Flexible Connectors and Hoses
Reference Standard 14 Heating and Combustion Equipment [PDF] (page 1)
-1984…… 1982 Gas Hose Connectors for Portable Indoor Gas-Fired Equipment, and Addenda Z21.2a1985, Z21.2b-1987 ...
Reference Standard 15 Chimneys and Gas Vents [PDF] (page 3)
, and Addenda Z21.1a-1982, Z21.1b-1984. ANSI-A21.2-1983—Gas Hose Connectors for Portable Indoor Gas-Fired Equipment, and Addenda Z21.2a-1985, Z21.2b-1987 ...
Reference Standard 14 Heating and Combustion Equipment [PDF] (page 7)
-Z21.1-1983 - Gas Hose Connectors for Portable Indoor Gas-Fired Equipment, and Addenda Z21.2a-1985. ANSI-Z21.3-1982 - Hotel and Restaurant Gas Ranges ...