// CODE SNIPPET
920.4.3 Horizontal Clearance
JUMP TO FULL CODE CHAPTER
Related Code Sections
(C) Wiring and Protection, Horizontal Clearances
Clearances shall not be less than 900 mm (3 ft) ...
National Electrical Code 2017 of Nevada > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.19 Clearances From Buildings for Conductors of Not Over 1000 Volts, Nominal > (C) Horizontal Clearances
920.4.3 Installation of Specific Appliances, Horizontal Clearance
The horizontal distance from the center of the burner head(s) of a listed top (or surface) cooking appliance to vertical combustible walls extending ...
2018 Uniform Mechanical Code of Nevada > 9 Installation of Specific Appliances > 920.0 Household Cooking Appliances > 920.4 Built-In Units > 920.4.3 Horizontal Clearance
919.3 Installation of Specific Appliances, Clearance for Unlisted Appliances
Unlisted food service hot plates and griddles shall be installed with a horizontal clearance from combustible material of not less than 18 inches ...
2018 Uniform Mechanical Code of Nevada > 9 Installation of Specific Appliances > 919.0 Food Service Appliances, Counter Appliances > 919.3 Clearance for Unlisted Appliances
126.96.36.199.3.3* Installation Requirements,
Under a steeply pitched surface, the distance from the peak to the deflectors shall be permitted to be increased to maintain a horizontal clearance ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 8 Installation Requirements > 8.6 Standard Pendent and Upright Spray Sprinklers > 8.6.4 Deflector Position (Standard Pendent and Upright Spray Sprinklers) > 188.8.131.52 Distance Below Ceilings > 184.108.40.206.3 Peaked Roofs and Ceilings > 220.127.116.11.3.3*
18.104.22.168 Hanging, Bracing, and Restraint of System Piping,
No horizontal clearance (tight fit) shall be provided for piping that is laterally supported by the side edges of holes through structural members ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.4* Clearance > 22.214.171.124