// CODE SNIPPET
P-904.4.2 Horizontal Branch Size
JUMP TO FULL CODE CHAPTER
The size of the horizontal branch from the base of the soil or waste stack
connected to the house drain is determined by the fixture-units and gradient fall.
Related Code Sections
P-904.4.2 Soil and Waste Piping, Horizontal Branch Size
The size of the horizontal branch from the base of the soil or waste stack
connected to the house drain is determined by the fixture-units ...
Philadelphia Plumbing Code > 9 Soil and Waste Piping > P-904 Sizes > P-904.4 Maximum Fixture-Unit Load > P-904.4.2 Horizontal Branch Size
914.3 Vents, Slope and Size of Horizontal Branch
). The entire length of the vent section of the horizontal branch drain shall be sized for the total drainage discharge to the branch ...
Plumbing Code 2018 of Philadelphia > 9 Vents > 914 Circuit Venting > 914.3 Slope and Size of Horizontal Branch
P3110.3 Vents, Slope and Size of Horizontal Branch
). The entire length of the vent section of the horizontal branch drain shall be sized for the total drainage discharge to the branch in accordance ...
2018 Philadelphia Residential Code > 31 Vents > P3110 Circuit Venting > P3110.3 Slope and Size of Horizontal Branch
917.3 Vents, Branch Size
Horizontal branches connecting to a single-stack vent system shall be sized in accordance with Table 710.1(2). Not more than one water closet shall ...
P3113.3 Vents, Branch Vents
Where branch vents are connected to a common branch vent, the common branch vent shall be sized in accordance with this section, based on the size ...