// CODE SNIPPET
7.5 Horizontal Bracing
JUMP TO FULL CODE CHAPTER
Horizontal bracing forms a complete system of adequate capacity.
For conforming buildings, the evaluator may consider this condition as mitigated, and no calculations are necessary. The deficiency is an incomplete or inadequate horizontal bracing system. Evaluate the horizontal bracing system for completeness of the system and its ability to gather all tributary forces and deliver them to the walls or frames.
Related Code Sections
7.5 Seismic Evaluation Procedures for Hospital Buildings, Horizontal Bracing
Horizontal bracing forms a complete system of adequate capacity. For conforming buildings, the evaluator may consider this condition as mitigated ...
California Administrative Code 2019 > 6 Seismic Evaluation Procedures for Hospital Buildings > 7 Procedures for Diaphragms > 7.5 Horizontal Bracing
7.5 Seismic Evaluation Procedures for Hospital Buildings, Horizontal Bracing
Horizontal bracing forms a complete system of adequate capacity. For conforming buildings, the evaluator may consider this condition as mitigated ...
California Administrative Code 2016 > 6 Seismic Evaluation Procedures for Hospital Buildings > 7 Procedures for Diaphragms > 7.5 Horizontal Bracing
A113.5 Guidelines for the Seismic Retrofit of Existing Buildings, Wall Bracing
anchors. Horizontal spacing of vertical bracing members shall not exceed one-half of the unsupported height of the wall or 10 feet (3048 mm). Deflection ...
California Existing Building Code 2016 > A Guidelines for the Seismic Retrofit of Existing Buildings > A113 Detailed System Design Requirements > A113.5 Wall Bracing
A113.5 Guidelines for the Seismic Retrofit of Existing Buildings, Wall Bracing
anchors. Horizontal spacing of vertical bracing members shall not exceed one-half of the unsupported height of the wall or 10 feet (3048 mm). Deflection ...
California Existing Building Code 2019 > A Guidelines for the Seismic Retrofit of Existing Buildings > A113 Detailed Building System Design Requirements > A113.5 Wall Bracing
9.3.5.10 Hanging, Bracing, and Restraint of System Piping, Net Vertical Reaction Forces
Where the horizontal seismic loads used exceed 0.5 W p and the brace angle is less than 45 degrees from vertical or where the horizontal seismic ...
Standard for the Installation of Sprinkler Systems 2016 of California > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.5* Sway Bracing > 9.3.5.10 Net Vertical Reaction Forces