// CODE SNIPPET
516.6.3 Hood Plenum and Blower Section Cleaning Schedule
Related Code Sections
516.6.3 Exhaust Systems, Hood Plenum and Blower Section Cleaning Schedule
The entire hood plenum and the blower section shall be cleaned not less than once every 3 months. [NFPA 96:13.6.4] ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 516.0 Recirculating Systems > 516.6 Use and Maintenance > 516.6.3 Hood Plenum and Blower Section Cleaning Schedule
931.5.2 Installation of Specific Appliances, Hoods
A canopy-type hood shall be installed directly above each kiln. The face opening area of the hood shall be equal to or greater than the top ...
2018 Uniform Mechanical Code of Nevada > 9 Installation of Specific Appliances > 931.0 Small Ceramic Kilns > 931.5 Installations Inside Buildings > 931.5.2 Hoods
508.3.5 Exhaust Systems, Exhaust Hood Assemblies With Integrated Supply-Air Plenums
The construction and size of exhaust hood assemblies with integrated supply air plenums shall be in accordance with the requirements of Section 508.1 ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 508.0 Type I Hoods > 508.3 Construction of Type I Hoods > 508.3.5 Exhaust Hood Assemblies With Integrated Supply-Air Plenums
2604.1.1 Plastic, Plenums
Foam plastics installed in plenums as interior wall or ceiling finish shall comply with Section 2603.7. Foam plastics installed in plenums ...
Building Code 2018 of Nevada > 26 Plastic > 2604 Interior Finish and Trim > 2604.1 General > 2604.1.1 Plenums
Section M1503 Exhaust Systems, Range Hoods
Range hoods shall discharge to the outdoors through a single-wall duct. The duct serving the hood shall have a smooth interior surface, shall be air ...