// CODE SNIPPET
98-142 High Line Level Wall Requirements Within Subarea J
JUMP TO FULL CODE CHAPTER
Any additions to the windows or other glazing located on the building wall separating the High Line from any building located on a zoning lot within Subarea J at the High Line level shall be designed to provide for a minimum of 30 dBA noise attenuation, and any general illumination fixtures in the adjoining interior portion of the building shall not exceed 50 foot-candles of illumination within four feet of such window or glazing and shall not be pointed directly at the High Line.
Related Code Sections
§27-383 Means of Egress, Requirements
within street level lobbies, there shall be directional markings. (3) Required markings for exit paths shall comply with the technical standards ...
§27-863 Chimneys and Gas Vents, Chimney Construction for Low, Medium, and High Temperature Equipment
inches c
Full height from chimney base to 4 in. above chimney walls.
Clay flue lining meeting requirements of Reference Standard RS 15-4 ...
NYC 1968 Code (Vol I) > 15 Chimneys and Gas Vents > 2 Chimneys > §27-863 Chimney Construction for Low, Medium, and High Temperature Equipment
2113.11.3.3 Masonry, Lining
The inside of the interior wall shall be lined with an approved high-duty refractory brick, a minimum of 4 1 / 2 inches (114 mm) thick laid on the 4 ...
NYC Building Code 2008 > 21 Masonry > 2113 Masonry Chimneys > 2113.11 Flue Lining (Material) > 2113.11.3 Concrete and Masonry Chimneys for High-Heat Appliances > 2113.11.3.3 Lining