// CODE SNIPPET
(1) High-Leg Identification
Related Code Sections
(1) Equipment for General Use, High-Leg Identification
A switchboard, switchgear, or panelboard containing a 4-wire, delta-connected system where the midpoint of one phase winding is grounded shall ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.3 Support and Arrangement of Busbars and Conductors > (F) Switchboard, Switchgear, or Panelboard Identification > (1) High-Leg Identification
110.15 General, High-Leg Marking
to ground shall be durably and permanently marked by an outer finish that is orange in color or by other effective means. Such identification shall ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.15 High-Leg Marking
401.5 Gas Piping Installations, Identification
Exposed medium and high pressure gas piping systems shall include ...
Minnesota Fuel Gas Code 2015 > 4 Gas Piping Installations > 401 (IFGC) General > 401.5 Identification
R802.1 Roof-Ceiling Construction, Identification
shall contain: The identification mark of an approved agency in accordance with Section 1703.5 of the International Building Code. Identification ...
Minnesota Residential Code 2015 > 8 Roof-Ceiling Construction > R802 Wood Roof Framing > R802.1 Identification
3.3.138 Definitions, Leg Facility
The portion of a communications channel that connects not more than one protected premises to a primary or secondary trunk facility. The leg facility ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 3 Definitions > 3.3 General Definitions > 3.3.138 Leg Facility