// CODE SNIPPET
605.2 Height and Depth
JUMP TO FULL CODE CHAPTER
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground. Urinals shall be 13 1/2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture.
Related Code Sections
605.2 Plumbing Elements and Facilities, Height and Depth
be 13 1 / 2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture. Figure 605.2 Height and Depth ...
504.2 General Site and Building Elements, Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 ...
1009.4 Recreation Facilities, Transfer Walls
The height of the transfer wall shall be 16 inches (405 mm ...
2010 ADA Standards > 10 Recreation Facilities > 1009 Swimming Pools, Wading Pools, and Spas > 1009.4 Transfer Walls
306.3.4 Building Blocks, Clearance Reduction
inch (25 mm) in depth for each 6 inches (150 mm) in height ...
2010 ADA Standards > 3 Building Blocks > 306 Knee and Toe Clearance > 306.3 Knee Clearance > 306.3.4 Clearance Reduction
308.3.2 Building Blocks, Obstructed High Reach
Where a clear floor or ground space allows a parallel approach to an element and the high side reach is over an obstruction, the height ...
2010 ADA Standards > 3 Building Blocks > 308 Reach Ranges > 308.3 Side Reach > 308.3.2 Obstructed High Reach