// CODE SNIPPET
P-811.3.2 Height Adjustment
Related Code Sections
P-811.3.2 Water Supply and Distribution, Height Adjustment
For each floor above the first floor, deduct 10 psi from the tank or main pressure ...
Philadelphia Plumbing Code > 8 Water Supply and Distribution > P-811 Water Supply Fixtures > P-811.3 Minimum Water Supply Sizes to Flushometers > P-811.3.2 Height Adjustment
R907.2 Roof Assemblies, Wind Resistance
), adjusted for height and exposure in accordance with Table R301.2(3) ...
2018 Philadelphia Residential Code > 9 Roof Assemblies > R907 Rooftop-Mounted Photovoltaic Systems > R907.2 Wind Resistance
R603.9.4.2 Wall Construction, Hold-Down Anchor
Where the percentage of full-height sheathing is adjusted in accordance with Section R603.9.2.2, a hold-down anchor, with a strength of 4,300 pounds ...
2018 Philadelphia Residential Code > 6 Wall Construction > R603 Cold-Formed Steel Wall Framing > R603.9 Structural Sheathing > R603.9.4 Uplift Connection Requirements > R603.9.4.2 Hold-Down Anchor
R609.2 Wall Construction, Performance
Exterior windows and doors shall be designed to resist the design wind loads specified in Table R301.2(2) adjusted for height and exposure ...
2018 Philadelphia Residential Code > 6 Wall Construction > R609 Exterior Windows and Doors > R609.2 Performance
R703.11.2.2 Wall Covering, Basic Wind Speed Exceeding 115 Miles Per Hour or Exposure Categories C and D
are not met, the adjusted design pressure rating for the assembly shall meet or exceed the loads listed in Table R301.2(2) adjusted for height ...
2018 Philadelphia Residential Code > 7 Wall Covering > R703 Exterior Covering > R703.11 Vinyl Siding > R703.11.2 Foam Plastic Sheathing > R703.11.2.2 Basic Wind Speed Exceeding 115 Miles Per Hour or Exposure Categories C and D