// CODE SNIPPET
1309.9.1 Heating of Joint
JUMP TO FULL CODE CHAPTER
Where flux is permitted, the joint shall be heated slowly until the flux has liquefied. After flux is liquefied, or where flux is not permitted to be used, the joint shall be heated quickly to the brazing temperature, taking care not to overheat the joint. [NFPA 99:5.1.10.4.6.2, 5.1.10.4.6.3]
Related Code Sections
1309.9.1 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Heating of Joint
Where flux is permitted, the joint shall be heated slowly until the flux has liquefied. After flux is liquefied, or where flux is not permitted ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.9 Assembling and Heating Brazed Joints > 1309.9.1 Heating of Joint
1208.6.12.2 Fuel Gas Piping, Heat-Fusion Joint
Heat-fusion joints shall be made in accordance with qualified procedures that have been established and proven by test to produce gastight joints ...
2018 Uniform Plumbing Code of Nevada > 12 Fuel Gas Piping > 1208.0 Gas Piping System Design, Materials, and Components > 1208.6 Acceptable Piping Materials and Joining Methods > 1208.6.12 Plastic Piping, Joints, and Fittings > 1208.6.12.2 Heat-Fusion Joint
1308.5.9.2 Fuel Gas Piping, Heat-Fusion Joint
Heat-fusion joints shall be made in accordance with qualified procedures that have been established and proven by test to produce gastight joints ...
2018 Uniform Mechanical Code of Nevada > 13 Fuel Gas Piping > 1308.0 Gas Piping System Design, Materials, and Components > 1308.5 Acceptable Piping Materials and Joining Methods > 1308.5.9 Plastic Piping, Joints, and Fittings > 1308.5.9.2 Heat-Fusion Joint
605.11.1 Water Supply and Distribution, Heat-Fusion Joints
Heat-fusion joints for polypropylene (PP) pipe and fitting joints shall be installed with socket-type heat-fused polypropylene fittings, fusion ...
2018 Uniform Plumbing Code of Nevada > 6 Water Supply and Distribution > 605.0 Joints and Connections > 605.11 Polypropylene (PP) Piping and Joints > 605.11.1 Heat-Fusion Joints
705.5.1 Sanitary Drainage, Heat-Fusion Joints
Heat-fusion joints between PE sewer pipe or tubing and fittings shall be assembled in accordance with Section 705.5.1.1 through Section 705.5.1.3 ...
2018 Uniform Plumbing Code of Nevada > 7 Sanitary Drainage > 705.0 Joints and Connections > 705.5 Polyethylene (PE) Sewer Pipe > 705.5.1 Heat-Fusion Joints