// CODE SNIPPET
603.5 Heating Appliances and Equipment
JUMP TO FULL CODE CHAPTER
Heating appliances and equipment shall be listed and shall comply with the requirements of this section.
The heating element or combustion chamber shall have a permanent device to prevent accidental contact by persons or material.
Heating appliances and equipment shall be installed in accordance with the manufacturer's instructions, the Electrical Code, and the construction codes, including the Building Code, the Mechanical Code and the Fuel Gas Code.
Related Code Sections
107.2 Administration, Required Inspections and Testing
to prohibit the operation of any heating equipment or appliances installed to replace existing heating equipment or appliances serving an occupied ...
NYC Mechanical Code 2014 > 1 Administration > 107 Inspections and Testing > 107.2 Required Inspections and Testing
107.1 Administration, General
the operation of any heating equipment or appliances installed to replace existing heating equipment or appliances serving an occupied portion ...
Section 312 General Regulations, Heating and Cooling Load Calculations
Heating and cooling system design loads for the purpose of sizing systems, appliances and equipment shall be determined in accordance ...
Section 312 General Regulations, Heating and Cooling Load Calculations
Heating and cooling system design loads for the purpose of sizing systems, appliances and equipment shall be determined in accordance ...
305.8 General Regulations, Clearances to Combustible Construction
Heat-producing equipment and appliances shall be installed to maintain the required clearances to combustible construction as specified ...
NYC Fuel Gas Code 2008 > 3 General Regulations > 305 Installation > 305.8 Clearances to Combustible Construction