• Codes
  • Features
    UpCodes Web UpCodes AI
  • Pricing
  • Sign Up
  • Log in
Log in
Sign Up
  • Code Library
  • Features
  • Pricing
  • About
  • Resources
  • Contact
  • Terms
  • Privacy
// CODE SNIPPET

Section 312 Heating and Cooling Load Calculations

Mechanical Code 2015 of Utah > 3 General Regulations > 312 Heating and Cooling Load Calculations
JUMP TO FULL CODE CHAPTER
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.

312.1 Load Calculations

Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Heating and cooling system design loads for the purpose of sizing systems, appliances and equipment shall be determined in accordance with the procedures described in the ASHRAE/ACCA Standard 183. Alternatively, design loads shall be determined by an approved equivalent computation procedure, using the design parameters specified in Chapter 3 [CE] of the International Energy Conservation Code.

Related Code Sections


Section 312 General Regulations, Heating and Cooling Load Calculations
Heating and cooling system design loads for the purpose of sizing systems, appliances and equipment shall be determined in accordance ...
Mechanical Code 2015 of Utah > 3 General Regulations > 312 Heating and Cooling Load Calculations
Section C302 [CE] General Requirements, Design Conditions
The interior design temperatures used for heating and cooling load calculations shall be a maximum of 72°F (22°C) for heating and minimum of 75°F (24 ...
Energy Conservation Code 2015 of Utah > 3 [CE] General Requirements > C302 Design Conditions
N1101.9 [RE] Energy Efficiency, (R302.1) Interior Design Conditions
The interior design temperatures used for heating and cooling load calculations shall be a maximum of 72°F (22°C) for heating and minimum of 75°F (24 ...
Residential Code 2015 of Utah > 11 [RE] Energy Efficiency > N1101 GENERAL > N1101.9 (R302.1) Interior Design Conditions
Section R302 [RE] General Requirements, Design Conditions
The interior design temperatures used for heating and cooling load calculations shall be a maximum of 72°F (22°C) for heating and minimum of 75°F (24 ...
Energy Conservation Code 2015 of Utah > 3 [RE] General Requirements > R302 Design Conditions
C403.2.1 [CE] Commercial Energy Efficiency, Calculation of heating and cooling loads
Standard 183 or by an approved equivalent computational procedure using the design parameters specified in Chapter 3. Heating and cooling loads shall ...
Energy Conservation Code 2015 of Utah > 4 [CE] Commercial Energy Efficiency > C403 Building Mechanical Systems > C403.2 Provisions applicable to all mechanical systems (Mandatory) > C403.2.1 Calculation of heating and cooling loads
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
COMPANY INFO About Resources Contact Careers Terms Privacy
CATEGORY General New York City New York State California Codes Building Codes Online
PREMIUM Features Pricing Sign Up Log In
CODES IBC 2015 IRC 2015 IPC 2015 California Building Code 2016 Popular Sections
FOLLOW US