// CODE SNIPPET
1215.5 Heat Transfer Medium
JUMP TO FULL CODE CHAPTER
The flash point of a transfer fluid in a hydronic piping system shall be a minimum of 50°F (28°C) above the maximum system operating temperature. The transfer fluid shall be compatible with the makeup water supplied to the system.
Related Code Sections
1215.5 Hydronics, Heat Transfer Medium
The flash point of a transfer fluid in a hydronic piping system shall be a minimum of 50°F (28°C) above the maximum system operating temperature. The ...
Los Angeles Mechanical Code > 12 Hydronics > 1215.0 Hydronic Space Heating > 1215.5 Heat Transfer Medium
1218.0 Hydronics, Heat Exchangers
Systems utilizing heat exchangers shall protect the potable water system from being contaminated by the heat transfer medium. Systems ...
1212.1 Hydronics, General
Valves shall be rated for the operating temperature and pressure of the system. Valves shall be compatible with the type of heat transfer medium ...
1208.1 Hydronics, General
Circulators shall be listed for their intended use based on the heat transfer medium. Circulators shall be installed to allow for service ...
2906.4 Manufacture of Organic Coatings, Closed Kettles
The vaporizer section of heat-transfer systems that heat closed kettles containing solvents shall be remotely located ...
Los Angeles Fire Code > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.4 Closed Kettles