// CODE SNIPPET
1910.1029(f)(2)(ii)(e) Heat Shields on Door Machines
Related Code Sections
1910.1029(f)(2)(ii)(e) Toxic and Hazardous Substances, Heat Shields on Door Machines
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1029 Coke Oven Emissions > 1910.1029(f) Methods of Compliance > 1910.1029(f)(2) Engineering Controls > 1910.1029(f)(2)(i) Charging > 1910.1029(f)(2)(ii) Coking > 1910.1029(f)(2)(ii)(e) Heat Shields on Door Machines
1910.255(b)(5) Welding, Cutting, and Brazing, Shields
The hazard of flying sparks shall be, wherever practical, eliminated by installing a shield guard of safety glass or suitable fire-resistant plastic ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.255 Resistance Welding > 1910.255(b) Spot and Seam Welding Machines (Nonportable) > 1910.255(b)(5) Shields
1910.262(b)(31) Special Industries, Sanforizing Machine
A sanforizing machine is a machine consisting of a large steam-heated cylinder, an endless, thick, woolen felt blanket which is in close contact ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(31) Sanforizing Machine
1910.305(h)(2) Electrical, Shielding
Cables operated at over 2,000 volts shall be shielded for the purpose of confining the voltage stresses to the insulation ...
OSHA 1910 General Industry > S Electrical > 1910.305 Wiring Methods, Components, and Equipment for General Use > 1910.305(h) Portable Cables Over 600 Volts, Nominal > 1910.305(h)(2) Shielding
1910.306(g) Electrical, Induction and Dielectric Heating Equipment
This paragraph applies to induction and dielectric heating equipment and accessories for industrial and scientific applications, but not for medical ...
OSHA 1910 General Industry > S Electrical > 1910.306 Specific Purpose Equipment and Installations > 1910.306(g) Induction and Dielectric Heating Equipment