// CODE SNIPPET
[F] 909.9.3 Heat-Release Assumptions
JUMP TO FULL CODE CHAPTER
The analysis shall make use of best available data from approved sources and shall not be based on excessively stringent limitations of combustible material.
Related Code Sections
909.9.3 Fire Protection and Life Safety Systems, Heat-Release Assumptions
The analysis shall make use of best available data from approved sources and shall not be based on excessively stringent limitations of combustible ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.9 Design Fire > 909.9.3 Heat-Release Assumptions
22.5.2 Sectional Strength, Geometric Assumptions
For calculation of V c and V s in prestressed members, d shall be taken as the distance from the extreme compression fiber ...
Building Code Requirements for Structural Concrete of Illinois > 22 Sectional Strength > 22.5 One-Way Shear Strength > 22.5.2 Geometric Assumptions
6.3 Structural Analysis, Modeling Assumptions
Relative stiffnesses of members within structural systems shall be based on reasonable and consistent assumptions ...
Building Code Requirements for Structural Concrete of Illinois > 6 Structural Analysis > 6.3 Modeling Assumptions
A9.4 Normative Appendix A Rated R-Value of Insulation and Assembly U-factor, C-Factor, and F-Factor Determinations, Calculation Procedures and Assumptions
The following procedures and assumptions shall be used for all calculations. R-values for air films, air spaces , insulation, and building ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > Normative Appendix A Rated R-Value of Insulation and Assembly U-factor, C-Factor, and F-Factor Determinations > A9 Determination of Alternate Assembly U-Factors, C-Factors, F-Factors, or Heat Capacities > A9.4 Calculation Procedures and Assumptions
22.2.2 Sectional Strength, Design Assumptions for Concrete
Maximum strain at the extreme concrete compression fiber shall be assumed equal to 0.003 ...
Building Code Requirements for Structural Concrete of Illinois > 22 Sectional Strength > 22.2 Design Assumptions for Moment and Axial Strength > 22.2.2 Design Assumptions for Concrete