// CODE SNIPPET
1926.57(g)(1)(ix) Header Pipe (Main Pipe)
JUMP TO FULL CODE CHAPTER
A pipe into which one or more branch pipes enter and which connects such branch pipes to the remainder of the exhaust system.
Related Code Sections
1926.57(g)(1)(ix) Occupational Health and Environmental Controls, Header Pipe (Main Pipe)
A pipe into which one or more branch pipes enter and which connects such branch pipes to the remainder of the exhaust system ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.57 Ventilation > 1926.57(g) Grinding, Polishing, and Buffing Operations > 1926.57(g)(1) Definitions Applicable to This Paragraph > 1926.57(g)(1)(ix) Header Pipe (Main Pipe)
1926.152(k)(3) Fire Protection and Prevention, Piping
Piping between shore tanks and dispensing units shall be as described in paragraph (k)(2)(iii) of this section, except that, where dispensing is from ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.152 Flammable Liquids > 1926.152(k) Marine Service Stations > 1926.152(k)(3) Piping
1926.152(j)(3) Fire Protection and Prevention, Pipe Joints
tight with a suitable lubricant or piping compound. Pipe joints dependent upon the friction characteristics of combustible materials for mechanical ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.152 Flammable Liquids > 1926.152(j) Piping, Valves, and Fittings > 1926.152(j)(3) Pipe Joints
1926.405(j)(5)(vii) Electrical, Pipes and Ducts
Any pipe or duct system foreign to the vault installation shall not enter or pass through a transformer vault ...
OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(j) Equipment for General Use > 1926.405(j)(5) Transformers > 1926.405(j)(5)(vii) Pipes and Ducts
1926.57(g)(1)(iii) Occupational Health and Environmental Controls, Branch Pipe
The part of an exhaust system piping that is connected directly to the hood or enclosure ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.57 Ventilation > 1926.57(g) Grinding, Polishing, and Buffing Operations > 1926.57(g)(1) Definitions Applicable to This Paragraph > 1926.57(g)(1)(iii) Branch Pipe