// CODE SNIPPET
1910.217(b)(1) Hazards to Personnel Associated With Broken or Falling Machine Components
JUMP TO FULL CODE CHAPTER
Machine components shall be designed, secured, or covered to minimize hazards caused by breakage, or loosening and falling or release of mechanical energy (i.e. broken springs).
Related Code Sections
1910.217(b)(1) Machinery and Machine Guarding, Hazards to Personnel Associated With Broken or Falling Machine Components
Machine components shall be designed, secured, or covered to minimize hazards caused by breakage, or loosening and falling or release of mechanical ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(b) Mechanical Power Press Guarding and Construction, General > 1910.217(b)(1) Hazards to Personnel Associated With Broken or Falling Machine Components
1910.266(f) Special Industries, Machines
from employees and other machines such that operation will not create a hazard for an employee ...
OSHA 1910 General Industry > R Special Industries > 1910.266 Logging Operations > 1910.266(f) Machines
1910.1029(l) Toxic and Hazardous Substances, Communication of Hazards
) of this section:
DANGER
CANCER HAZARD
AUTHORIZED PERSONNEL ONLY
NO SMOKING OR EATING ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1029 Coke Oven Emissions > 1910.1029(l) Communication of Hazards
1910.30(a) Walking-Working Surfaces, Fall Hazards
Before any employee is exposed to a fall hazard, the employer must provide training for each employee who uses personal fall protection systems ...
OSHA 1910 General Industry > D Walking-Working Surfaces > 1910.30 Training Requirements > 1910.30(a) Fall Hazards
1910.147(f) General Environmental Controls, Additional Requirements
to test or position the machine, equipment or component thereof, the following sequence of actions shall be followed ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.147 The Control of Hazardous Energy (Lockout/Tagout) > 1910.147(f) Additional Requirements