// CODE SNIPPET
1607.11.5 Hanging Loads
JUMP TO FULL CODE CHAPTER
Girders and roof trusses (other than joists) over garage areas regularly utilized for the repair of vehicles and over manufacturing floors or storage floors used for commercial purposes shall be capable of supporting, in addition to the specified live and wind loads, a concentrated live load of 2,000 pounds (908 kg) applied at any lower chord panel point for trusses, and at any point of the lower flange for girders.
Related Code Sections
1607.11.2.5 Structural Design, Hanging Loads
floors used for commercial purposes shall be capable of supporting, in addition to the specified live and wind loads, a concentrated live load ...
NYC Building Code 2008 > 16 Structural Design > 1607 Live Loads > 1607.11 Roof Loads > 1607.11.2 Minimum Roof Live Loads > 1607.11.2.5 Hanging Loads
1607.11.5 Structural Design, Hanging Loads
floors used for commercial purposes shall be capable of supporting, in addition to the specified live and wind loads, a concentrated live load ...
NYC Building Code 2014 > 16 Structural Design > 1607 Live Loads > 1607.11 Roof Loads > 1607.11.5 Hanging Loads
Appendix A Selected Rules of the Department of Buildings [PDF] (page 23)
hanging operations involving loads that: (i) are at or above 95% of approved rated capacity of the crane or rigging equipment, (ii) are asymmetrical ...
3314.7 Safeguards During Construction or Demolition, Outrigger Beams
that the suspension ropes will hang vertically ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3314 Scaffolds > 3314.7 Outrigger Beams
Article 14 Elevators [PDF] (page 18)
SUB-GROUP 5 Machine Supports, Loads on Supports and Factors of Safety (13.2.1.6.1). §C26-876.0 Machine Supports.-Machinery and sheaves shall ...