// CODE SNIPPET
322.4.3 Handrails and Grab Rails
Go To Full Code Chapter
Recessed treads shall be provided with a handrail or grab rail on each side of the treads. The clear distance between handrails and grab rails shall be not less than 17 inches (432 mm) and not greater than 24 inches (610 mm).
Upcodes Diagrams
Related Code Sections
322.4.3 General Compliance, Handrails and Grab Rails
Recessed treads shall be provided with a handrail or grab rail on each side of the treads. The clear distance between handrails and grab rails shall ...
402.13 Public Swimming Pools, Ladders for Diving Equipment
Ladders shall be provided with two grab rails or two handrails. There shall be a uniform distance between ladder treads, with a 7-inch (178 mm ...
1607.8.1.2 Structural Design, Intermediate Rails
Intermediate rails (all those except the handrail), balusters and panel fillers shall be designed to resist a concentrated load of 50 pounds (0.22 kN ...
1607.8.1.2 Structural Design, Intermediate Rails
Intermediate rails (all those except the handrail), balusters and panel fillers shall be designed to resist a concentrated load of 50 pounds (0.22 kN ...
1607.7.1 Structural Design, Handrails and Guards
Intermediate rails (all those except the handrail ...