// CODE SNIPPET
1910.261(c)(1) Handling Pulpwood With Forklift Trucks
Go To Full Code Chapter
Where large forklift trucks, or lift trucks with clam-jaws, are used in the yard, the operator's enclosed cab shall be provided with an escape hatch, whenever the hydraulic arm blocks escape through the side doors.
Upcodes Diagrams
Related Code Sections
1910.261(c)(1) Special Industries, Handling Pulpwood With Forklift Trucks
Where large forklift trucks, or lift trucks with clam-jaws, are used in the yard, the operator's enclosed cab shall be provided with an escape hatch ...
1910.261(c)(5)(ii) Special Industries,
Where binder chain and steel stakes are used, the binder chains shall be released and the stakes tripped from the opposite side of the load spillage ...
1910.261(c)(5)(iii) Special Industries,
Where binder chains and crane slings are used, the crane slings shall be attached and taut before the binder chains are released. The hooker shall see ...
1910.261(c)(2)(i) Special Industries,
Where locomotive cranes are used for loading or unloading pulpwood, the pulpwood shall be piled so as to allow a clearance of not less than 24 inches ...
1910.261(c)(7) Special Industries, Handling Pulp Chips From Trucks and Trailers
All trucks and trailers shall be securely fastened in place and all employees in the clear before dumping is started ...