UpCodes logo
Go To Full Code Chapter
1926.1419(c)(1)
When using hand signals, the Standard Method must be used (see Appendix A of this subpart). Exception: Where use of the Standard Method for hand signals is infeasible, or where an operation or use of an attachment is not covered in the Standard Method, non-standard hand signals may be used in accordance with paragraph (c)(2) of this section.
1926.1419(c)(2) Non-Standard Hand Signals
When using non-standard hand signals, the signal person, operator, and lift director (where there is one) must contact each other prior to the operation and agree on the non-standard hand signals that will be used.
Upcodes Diagrams

Related Code Sections

1926.1419(c) Cranes and Derricks in Construction, Hand Signals
When using hand signals, the Standard Method must be used (see Appendix A of this subpart). Exception: Where use of the Standard Method for hand ...
1926.1422 Cranes and Derricks in Construction, Signals--Hand Signal Chart
Hand signal charts must be either posted on the equipment or conspicuously posted in the vicinity of the hoisting operations. [75 FR 48153 ...
1926.1428(c)(1) Cranes and Derricks in Construction,
Know and understand the type of signals used. If hand signals are used, the signal person must know and understand the Standard Method for hand ...
1926.1428(c) Cranes and Derricks in Construction, Qualification Requirements
the type of signals used. If hand signals are used, the signal person must know and understand the Standard Method for hand signals ...