// CODE SNIPPET
1910.263(g)(2) Hand-Fed Moulders
JUMP TO FULL CODE CHAPTER
Hand-fed moulders shall be provided with a belt-feed device or the hopper shall be extended high enough so that the hands of the operator cannot get into the feed rolls. The top edge of such a hopper shall be well rounded to prevent injury when it is struck or bumped by the employee's hand.
Related Code Sections
1910.263(g)(2) Special Industries, Hand-Fed Moulders
Hand-fed moulders shall be provided with a belt-feed device or the hopper shall be extended high enough so that the hands of the operator cannot get ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(g) Moulders > 1910.263(g)(2) Hand-Fed Moulders
1910.213(c) Machinery and Machine Guarding, Hand-Fed Ripsaws
Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(c) Hand-Fed Ripsaws
1910.263(h) Special Industries, Manually Fed Dough Brakes
, or if the operator gets his hand caught in the rolls. The bar shall apply the body pressure to open positively a circuit that will deenergize the drive motor. In ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(h) Manually Fed Dough Brakes
1910.213(m)(1) Machinery and Machine Guarding,
The cutting heads of each wood shaper, hand-fed panel raiser, or other similar machine not automatically fed, shall be enclosed with a cage ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(m) Wood Shapers and Similar Equipment > 1910.213(m)(1)
1910.213(m) Machinery and Machine Guarding, Wood Shapers and Similar Equipment
The cutting heads of each wood shaper, hand-fed panel raiser, or other similar machine not automatically fed, shall be enclosed with a cage ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(m) Wood Shapers and Similar Equipment