// CODE SNIPPET
R903.5 Hail Exposure
JUMP TO FULL CODE CHAPTER
Hail exposure, as specified in Sections R903.5.1 and R903.5.2, shall be determined using Figure R903.5.
FIGURE R903.5
HAIL EXPOSURE MAP
HAIL EXPOSURE MAP
One or more hail days with hail diameters larger than 1.5 inches (38 mm) in a 20-year period.
One or more hail days with hail diameters larger than or equal to 2.0 inches (51 mm) in a 20-year period.
Related Code Sections
R903.5 Roof Assemblies, Hail Exposure
Hail exposure, as specified in Sections R903.5.1 and R903.5.2, shall be determined using Figure R903.5.
FIGURE R903.5 HAIL EXPOSURE MAP ...
Residential Code 2009 of Tennessee > 9 Roof Assemblies > R903 Weather Protection > R903.5 Hail Exposure
R907.3 Roof Assemblies, Recovering Versus Replacement
or severe hail exposure according to Figure R903.5. Exceptions: Complete and separate roofing systems, such as standing-seam metal roof systems ...
Residential Code 2009 of Tennessee > 9 Roof Assemblies > R907 Reroofing > R907.3 Recovering Versus Replacement
3003.2 Industrial Ovens, Exposure
When locating ovens, oven heaters and related equipment, the possibility of fire resulting from overheating or from the escape of fuel gas or fuel oil ...
1609.4 Structural Design, Exposure Category
For each wind direction considered, an exposure category that adequately reflects the characteristics of ground surface irregularities shall ...
(2) Wiring Methods and Materials, Chemical Exposure
Where subject to exposure to chemical solvents, vapors, splashing, or immersion, materials or coatings shall either be inherently resistant ...
National Electrical Code 2017 of Tennessee > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.6 Protection Against Corrosion and Deterioration > (C) Nonmetallic Equipment > (2) Chemical Exposure