// CODE SNIPPET
1910.68(b)(9) Guards for Openings
Go To Full Code Chapter
1910.68(b)(9)(ii) Height and Location
Such rails or guards shall be at least 42 inches in height on the up-running side and 66 inches on the down-running side.
Related Code Sections
1910.68(b)(9) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Guards for Openings
The floor opening at each landing shall be guarded on sides not used for entrance or exit by a wall, a railing and toeboard or by panels of wire mesh ...
1910.265(c)(26)(vi) Special Industries, Guarding Side Openings
The hoistway side openings at the top level of the stacker and unstacker shall be protected by enclosures of standard railings ...
1910.268(o)(1) Special Industries, Guarding Manholes and Street Openings
When covers of manholes or vaults are removed, the opening shall be promptly guarded by a railing, temporary cover, or other suitable temporary ...
1910.243(e)(2)(ii)(d) Hand and Portable Powered Tools and Other Hand-Held Equipment,
The catcher assembly, when properly and completely installed, shall not create a condition which violates the limits given for the guarded opening ...
1910.430(f)(3)(iii) Commercial Diving Operations,
Suction guards on exhaust line openings; and ...