// CODE SNIPPET

1926.307(o)(4) Guards for Horizontal Overhead Rope and Chain Drives

OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(o) Approved Materials > 1926.307(o)(4) Guards for Horizontal Overhead Rope and Chain Drives

JUMP TO FULL CODE CHAPTER

Overhead-rope and chain-drive guard construction shall conform to the rules for overhead-belt guard.

Related Code Sections

1926.307(o)(4) Tools - Hand and Power, Guards for Horizontal Overhead Rope and Chain Drives

Overhead-rope and chain-drive guard construction shall conform to the rules for overhead-belt guard ...

1926.307(e)(2)(iv) Tools - Hand and Power,

Overhead chain and link belt drives are governed by the same rules as overhead horizontal belts and shall be guarded in the same manner as belts ...

OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(e) Belt, Rope, and Chain Drives > 1926.307(e)(2) Overhead Horizontal Belts > 1926.307(e)(2)(iv)

1926.307(e)(4) Tools - Hand and Power, Vertical Belts

as horizontal overhead belts, if conditions are as stated in paragraphs (e)(2)(ii)(a) and (c) of this section ...

OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(e) Belt, Rope, and Chain Drives > 1926.307(e)(4) Vertical Belts

1926.307(e)(2)(i) Tools - Hand and Power,

Overhead horizontal belts, with lower parts 7 feet (2.128 m) or less from the floor or platform, shall be guarded on sides and bottom in accordance ...

1926.307(e)(2)(iii)(b) Tools - Hand and Power,

Where passage is regarded as necessary, there shall be a platform over the lower run guarded on either side by a railing completely filled ...