// CODE SNIPPET
1926.307(k) Guarding of Clutches, Cutoff Couplings, and Clutch Pulleys
JUMP TO FULL CODE CHAPTER
Clutches, cutoff couplings, or clutch pulleys having projecting parts, where such clutches are located 7 feet (2.128 m) or less above the floor or working platform, shall be enclosed by a stationary guard constructed in accordance with this section. A "U" type guard is permissible.
In engine rooms a guardrail, preferably with toeboard, may be used instead of the guard required by paragraph (k)(1) of this section, provided such a room is occupied only by engine room attendants.
Related Code Sections
1926.307(k) Tools - Hand and Power, Guarding of Clutches, Cutoff Couplings, and Clutch Pulleys
Clutches, cutoff couplings, or clutch pulleys having projecting parts, where such clutches are located 7 feet (2.128 m) or less above the floor ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(k) Guarding of Clutches, Cutoff Couplings, and Clutch Pulleys
1926.307(d)(2)(i) Tools - Hand and Power,
Unless the distance to the nearest fixed pulley, clutch, or hanger exceeds the width of the belt used, a guide shall be provided to prevent the belt ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(d) Pulleys > 1926.307(d)(2) Location of Pulleys > 1926.307(d)(2)(i)
1926.307 Tools - Hand and Power, Mechanical Power-Transmission Apparatus
Clutches, cutoff couplings, or clutch pulleys having ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus
1926.307(l)(1) Tools - Hand and Power, Belt Shifters
Tight and loose pulleys on all new installations made on or after August 31, 1971, shall be equipped with a permanent belt shifter provided ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(l) Belt Shifters, Clutches, Shippers, Poles, Perches, and Fasteners > 1926.307(l)(1) Belt Shifters
1926.307(l)(1)(i) Tools - Hand and Power,
Tight and loose pulleys on all new installations made on or after August 31, 1971, shall be equipped with a permanent belt shifter provided ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(l) Belt Shifters, Clutches, Shippers, Poles, Perches, and Fasteners > 1926.307(l)(1) Belt Shifters > 1926.307(l)(1)(i)