// CODE SNIPPET
1926.408(a)(3)(ii) Guarding Live Parts
JUMP TO FULL CODE CHAPTER
All energized switching and control parts shall be enclosed in effectively grounded metal cabinets or enclosures. Circuit breakers and protective equipment shall have the operating means projecting through the metal cabinet or enclosure so these units can be reset without locked doors being opened. Enclosures and metal cabinets shall be locked so that only authorized qualified persons have access and shall be marked with a sign warning of the presence of energized parts. Collector ring assemblies on revolving-type machines (shovels, draglines, etc.) shall be guarded.
Related Code Sections
1926.408(a)(3)(ii) Electrical, Guarding Live Parts
of the presence of energized parts. Collector ring assemblies on revolving-type machines (shovels, draglines, etc.) shall be guarded ...
OSHA 1926 Construction > K Electrical > 1926.408 Special Systems > 1926.408(a) Systems Over 600 Volts, Nominal > 1926.408(a)(3) Mobile and Portable Equipment > 1926.408(a)(3)(ii) Guarding Live Parts
1926.403(i)(2) Electrical, Guarding of Live Parts
Except as required or permitted elsewhere in this subpart, live parts of electric equipment operating at 50 volts or more shall be guarded against ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(i) 600 Volts, Nominal, or Less > 1926.403(i)(2) Guarding of Live Parts
1926.403(i)(2)(i)(A) Electrical,
By location in a room, vault, or similar enclosure that is accessible only to qualified persons ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(i) 600 Volts, Nominal, or Less > 1926.403(i)(2) Guarding of Live Parts > 1926.403(i)(2)(i) > 1926.403(i)(2)(i)(A)
1926.403(i)(2)(i)(C) Electrical,
By location on a balcony, gallery, or platform so elevated and arranged as to exclude unqualified persons ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(i) 600 Volts, Nominal, or Less > 1926.403(i)(2) Guarding of Live Parts > 1926.403(i)(2)(i) > 1926.403(i)(2)(i)(C)
1926.403(i)(2)(i)(D) Electrical,
By elevation of 8 feet (2.44 m) or more above the floor or other working surface and so installed as to exclude unqualified persons ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(i) 600 Volts, Nominal, or Less > 1926.403(i)(2) Guarding of Live Parts > 1926.403(i)(2)(i) > 1926.403(i)(2)(i)(D)