// CODE SNIPPET
R703.8.4.2 Grout Fill
JUMP TO FULL CODE CHAPTER
As an alternative to the airspace required by Table R703.8.4, grout shall be permitted to fill the airspace. Where the airspace is filled with grout, a water-resistive barrier is required over studs or sheathing. Where the airspace is filled, replacing the sheathing and water-resistive barrier with a wire mesh and approved water-resistive barrier or an approved water-resistive barrier-backed reinforcement attached directly to the studs is permitted.
Related Code Sections
R703.8.4.2 Wall Covering, Grout Fill
As an alternative to the airspace required by Table R703.8.4, grout shall be permitted to fill the airspace. Where the airspace is filled with grout ...
Residential Code 2018 of Kansas > 7 Wall Covering > R703 Exterior Covering > R703.8 Anchored Stone and Masonry Veneer, General > R703.8.4 Anchorage > R703.8.4.2 Grout Fill
R606.7 Wall Construction, Piers
are used for isolated piers to support beams and girders, the cellular spaces shall be filled solidly with grout or Type M or S mortar, except ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.7 Piers
1810.4.10 Soils and Foundations, Micropiles
manner with the grout level maintained at the top of the element to ensure that the grout completely fills the drill hole. During withdrawal ...
Building Code 2018 of Kansas > 18 Soils and Foundations > 1810 Deep Foundations > 1810.4 Installation > 1810.4.10 Micropiles
R606.3.5 Wall Construction, Grouting Requirements
of the cells or spaces to be filled. In partially grouted construction, cross webs forming cells to be filled shall be full-bedded in mortar to prevent ...
Residential Code 2018 of Kansas > 6 Wall Construction > R606 General Masonry Construction > R606.3 Construction Requirements > R606.3.5 Grouting Requirements