// CODE SNIPPET
JUMP TO FULL CODE CHAPTER
Grout shall comply with Article 2.2 of TMS 602.
Related Code Sections
2103.3 Masonry, Grout
Grout shall comply with Article 2.2 of TMS 602 ...
19.4 Concrete: Design and Durability Requirements, Grout Durability Requirements
Water-soluble chloride ion content of grout for bonded tendons shall not exceed 0.06 percent when tested in accordance with ASTM C1218, measured ...
Building Code Requirements for Structural Concrete of Illinois > 19 Concrete: Design and Durability Requirements > 19.4 Grout Durability Requirements
7188.8.131.52 Fire and Smoke Protection Features, Solid Grouted Construction
The equivalent thickness, T e , of solid grouted concrete masonry units is the actual thickness of the unit ...
Building Code 2018 of Illinois > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.3 Concrete Masonry > 722.3.1 Equivalent Thickness > 7184.108.40.206 Solid Grouted Construction
20.6.4 Steel Reinforcement Properties, Durability, and Embedments, Corrosion Protection for Grouted Tendons
Ducts for grouted tendons shall be grout-tight and nonreactive with concrete, prestressing reinforcement, grout, and corrosion inhibitor admixtures ...
Building Code Requirements for Structural Concrete of Illinois > 20 Steel Reinforcement Properties, Durability, and Embedments > 20.6 Provisions for Durability of Steel Reinforcement > 20.6.4 Corrosion Protection for Grouted Tendons
1808.8.1 Soils and Foundations, Concrete or Grout Strength and Mix Proportioning
Concrete or grout in foundations shall have a specified compressive strength ( f ' c ) not less than the largest applicable value indicated in Table ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1808 Foundations > 1808.8 Concrete Foundations > 1808.8.1 Concrete or Grout Strength and Mix Proportioning