// CODE SNIPPET
406.1.4 Group I-2 Receptacles
Related Code Sections
406.1.4 Repairs, Group I-2 Receptacles
Receptacles in patient bed locations of Group I-2 that are not "hospital grade" shall be replaced with "hospital grade" receptacles, as required ...
Existing Building Code 2018 of Illinois > 4 Repairs > 406 Electrical > 406.1 Material > 406.1.4 Group I-2 Receptacles
(I) Wiring and Protection, Receptacle Outlets
at not less than 90 volt-amperes per receptacle. This provision shall not be applicable to the receptacle outlets specified in 210.11(C)(1) and (C)(2) ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.14 Other Loads — All Occupancies > (I) Receptacle Outlets
(A) Special Occupancies, Receptacles
Receptacles shall be part of the premises wiring, except as permitted by 501.140(A) ...
National Electrical Code 2017 of Illinois > 5 Special Occupancies > 501 Class I Locations > 501.145 Receptacles and Attachment Plugs, Class I, Divisions 1 and 2 > (A) Receptacles
Section 807 Alterations—Level 2, Electrical
wiring in all work areas in Group A-1, A-2, A-5, H and I occupancies shall be upgraded to meet the materials and methods requirements of Chapter 7 ...
(5) Special Occupancies, Receptacles and Attachment Plugs
Receptacles and attachment plugs in a hazardous (classified) location(s) shall be listed for use in Class I, Group C hazardous (classified) locations ...
National Electrical Code 2017 of Illinois > 5 Special Occupancies > 517 Health Care Facilities > 517.61 Wiring and Equipment > (A) Within Hazardous (Classified) Anesthetizing Locations > (5) Receptacles and Attachment Plugs