// CODE SNIPPET
545.12 Grounding Electrode Conductor
JUMP TO FULL CODE CHAPTER
Provisions shall be made to route a grounding electrode conductor from the service, feeder, or branch-circuit supply to the point of attachment to the grounding electrode.
Related Code Sections
(A) Wiring and Protection, Grounding Electrode Conductor
An equipment grounding conductor shall not be used as a grounding electrode conductor. Exception: A wire-type equipment grounding conductor ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.121 Restricted Use of Equipment Grounding Conductors > (A) Grounding Electrode Conductor
545.12 Special Occupancies, Grounding Electrode Conductor
Provisions shall be made to route a grounding electrode conductor from the service, feeder, or branch-circuit supply to the point of attachment ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 545 Manufactured Buildings and Relocatable Structures > 545.12 Grounding Electrode Conductor
(B) Special Equipment, Grounding Electrodes and Grounding Electrode Conductors
to be connected directly to the PV module frame(s) or support structure. A grounding electrode conductor shall be sized according to 250.66. A support ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.47 Grounding Electrode System > (B) Grounding Electrodes and Grounding Electrode Conductors
(1) Special Equipment, Grounding Electrodes and Grounding Electrode Conductors
A wind turbine tower shall be connected to a grounding electrode system. Where installed in close proximity to galvanized foundation or tower anchor ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 694 Wind Electric Systems > 694.40 Equipment Grounding and Bonding > (B) Tower Grounding and Bonding > (1) Grounding Electrodes and Grounding Electrode Conductors