// CODE SNIPPET
3314.11.5.4 Grounding Conductor
JUMP TO FULL CODE CHAPTER
In addition to a work lead attachment required by the welding process, a grounding conductor shall be connected from the scaffold to the structure. The size of the connector shall be at least the size of the welding process work lead, and this conductor shall not be in series with the welding process or the work piece.
Related Code Sections
3314.11.5.4 Safeguards During Construction or Demolition, Grounding Conductor
In addition to a work lead attachment required by the welding process, a grounding conductor shall be connected from the scaffold to the structure ...
NYC Building Code 2008 > 33 Safeguards During Construction or Demolition > 3314 Scaffolds > 3314.11 Suspension Rope > 3314.11.5 Arcing Prevention > 3314.11.5.4 Grounding Conductor
3314.11.5.4 Safeguards During Construction or Demolition, Grounding Conductor
In addition to a work lead attachment required by the welding process, a grounding conductor shall be connected from the scaffold to the structure ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3314 Scaffolds > 3314.11 Suspension Rope > 3314.11.5 Suspended Scaffold Welding Precautions for Arcing Prevention > 3314.11.5.4 Grounding Conductor
Section 310 General Regulations, Electrical Bonding
Each above-ground portion of a gas piping system that is likely to become energized shall be continuously bonded electrically to an effective ground ...
Section 310 General Regulations, Electrical Bonding
to the equipment grounding conductor of the circuit supplying that equipment ...
1006.8 Boilers, Water Heaters and Pressure Vessels, Electrical Requirements
The power supply to the electrical control system shall be from a two-wire branch circuit that has a grounded conductor, or from an isolation ...
NYC Mechanical Code 2008 > 10 Boilers, Water Heaters and Pressure Vessels > 1006 Safety and Pressure Relief Valves and Controls > 1006.8 Electrical Requirements