// CODE SNIPPET
408.41 Grounded Conductor Terminations
JUMP TO FULL CODE CHAPTER
Each grounded conductor shall terminate within the panelboard in an individual terminal that is not also used for another conductor.
Exception: Grounded conductors of circuits with parallel conductors shall be permitted to terminate in a single terminal if the terminal is identified for connection of more than one conductor.
Related Code Sections
408.41 Equipment for General Use, Grounded Conductor Terminations
Each grounded conductor shall terminate within the panelboard in an individual terminal that is not also used for another conductor. Exception ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.41 Grounded Conductor Terminations
455.5 Equipment for General Use, Equipment Grounding Connection
A means for attachment of an equipment grounding conductor termination in accordance with 250.8 shall be provided ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 455 Phase Converters > 455.5 Equipment Grounding Connection
(4) Wiring and Protection, Main Bonding Jumper as Wire or Busbar
Where the main bonding jumper specified in 250.28 is a wire or busbar and is installed from the grounded conductor terminal bar or bus ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.24 Grounding of Service-Supplied Alternating-Current Systems > (A) System Grounding Connections > (4) Main Bonding Jumper as Wire or Busbar
(E) Equipment for General Use, Use
for identification of equipment grounding conductor terminals ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) > 406.10 Grounding-Type Receptacles, Adapters, Cord Connectors, and Attachment Plugs > (E) Use
430.244 Equipment for General Use, Controllers
for attachment of an equipment grounding conductor termination in accordance with 250.8. Exception: Enclosures attached to ungrounded portable equipment shall ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.244 Controllers