// CODE SNIPPET
P-409.2 Ground Joints
JUMP TO FULL CODE CHAPTER
Ground joint brass connections which allow adjustment of tubing but provide a rigid joint
when made up shall not be considered slip joints.
Related Code Sections
P-409.2 Joints, Ground Joints
Ground joint brass connections which allow adjustment of tubing but provide a rigid joint
when made up shall not be considered slip joints ...
708.1.5 Sanitary Drainage, Cleanout Size
not be larger than 4 inches (102 mm). Exceptions: A removable P-trap with slip or ground joint connections can serve as a cleanout for drain piping ...
Plumbing Code 2018 of Philadelphia > 7 Sanitary Drainage > 708 Cleanouts > 708.1 Cleanouts Required > 708.1.5 Cleanout Size
M2105.6 Hydronic Piping, Joints and Connections
Joints and connections shall be of an approved type. Joints and connections shall be tight for the pressure of the ground-source loop system. Joints ...
2018 Philadelphia Residential Code > 21 Hydronic Piping > M2105 Ground-Source Heat-Pump System Loop Piping > M2105.6 Joints and Connections
605.21.1 Water Supply and Distribution, Mechanical Joints
-ground systems unless otherwise approved . Joints shall be installed in accordance with the manufacturer's instructions ...
Plumbing Code 2018 of Philadelphia > 6 Water Supply and Distribution > 605 Materials, Joints and Connections > 605.21 PVC Plastic > 605.21.1 Mechanical Joints
P-410.1 Joints, Above Ground
The types of joints prohibited above ground inside of a building are:
No-hub coupling on copper to copper pipe;
No-hub coupling on ABS or PVC.
...