// CODE SNIPPET
705.9.3 Ground Joint, Flared, or Ferrule Connections
Go To Full Code Chapter
Copper or copper alloy ground joint flared, or ferrule-type connections that allow adjustment of tubing, but provide a rigid joint where made up, shall not be considered as slip joints.
Upcodes Diagrams
Related Code Sections
705.9.3 Sanitary Drainage, Ground Joint, Flared, or Ferrule Connections
Copper or copper alloy ground joint flared, or ferrule-type connections that allow adjustment of tubing, but provide a rigid joint where made up ...
P2906.16 Water Supply and Distribution, Flared Joints
Flared joints in water tubing shall be made with approved fittings. The tubing shall be reamed and then expanded with a flaring tool ...
1203.6.1 Hydronic Piping, Flared Joints
Flared joints shall be made by a tool designed for that operation ...
605.1.2 Water Supply and Distribution, Flared Joints
Flared joints for soft copper or copper alloy water tubing shall be made with fittings that comply with the applicable standards referenced in Table ...
1210.6 Hydronic Piping, Joints
Joints and connections shall be of an approved type. Joints and connections shall be tight for the pressure of the ground-source loop system. Joints ...