// CODE SNIPPET
2904.4 Ground
JUMP TO FULL CODE CHAPTER
Metal framing of buildings shall be grounded with resistance of not more than 5 ohms.
Related Code Sections
1404.11.4 Exterior Walls, Grounding
Grounding of metal veneers on buildings shall comply with the requirements of Chapter 27 of this code ...
2020 Minnesota Building Code > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.11 Metal Veneers > 1404.11.4 Grounding
1405.11.4 Exterior Walls, Grounding
Grounding of metal veneers on buildings shall comply with the requirements of Chapter 27.of this code ...
Minnesota Building Code 2015 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.11 Metal Veneers > 1405.11.4 Grounding
2403.2.5 Flammable Finishes, Grounding
Metal parts of spray booths, exhaust ducts and piping systems conveying Class I or II liquids shall be electrically grounded in accordance with NFPA ...
2020 Minnesota State Fire Code > 24 Flammable Finishes > 2403 Protection of Operations > 2403.2 Sources of Ignition > 2403.2.5 Grounding
2403.2.5 Flammable Finishes, Grounding
Metal parts of spray booths, exhaust ducts and piping systems conveying Class I or II liquids shall be electrically grounded in accordance with NFPA ...
Minnesota Fire Code 2015 > 24 Flammable Finishes > 2403 Protection of Operations > 2403.2 Sources of Ignition > 2403.2.5 Grounding
2511.3 Gypsum Board, Gypsum Panel Products and Plaster, Grounds
Where installed, grounds shall ensure the minimum thickness of plaster as set forth in ASTM C842 and ASTM C926. Plaster thickness shall be measured ...
2020 Minnesota Building Code > 25 Gypsum Board, Gypsum Panel Products and Plaster > 2511 Interior Plaster > 2511.3 Grounds