// CODE SNIPPET
1003.3.4 Grease Interceptor and Automatic Grease Removal Device Sizing and Standards
JUMP TO FULL CODE CHAPTER
Grease interceptors and automatic grease removal devices shall be sized in accordance with the rules of the Department of Environmental Protection. Grease interceptors and automatic grease removal devices shall be designed and tested in accordance with PDI G101, ASME A112.14.3 or ASME A112.14.4 and shall be installed in accordance with the manufacturer's instructions.
Grease interceptors shall have a grease retention capacity in accordance with the rules of the Department of Environmental Protection.
Grease interceptors shall be equipped with devices to control the rate of water flow so that the water flow does not exceed the rated flow. The flow-control device shall be vented and terminate not less than 6 inches (152 mm) above the flood rim level or be installed in accordance with the manufacturer's instructions.
Related Code Sections
1003.3.4.1 Traps, Interceptors and Separators, Grease Interceptor Capacity
Grease interceptors shall have a grease retention capacity in accordance with the rules of the Department of Environmental Protection ...
NYC Plumbing Code 2014 > 10 Traps, Interceptors and Separators > 1003 Interceptors and Separators > 1003.3 Grease Interceptors > 1003.3.4 Grease Interceptor and Automatic Grease Removal Device Sizing and Standards > 1003.3.4.1 Grease Interceptor Capacity
Section 1003 Traps, Interceptors and Separators, Interceptors and Separators
Grease interceptors and automatic grease removal devices shall be sized in accordance with the rules of the Department of Environmental ...
1003.3 Traps, Interceptors and Separators, Grease Traps and Grease Interceptors
interceptors and grease interceptors shall be sized and rated for the discharge of the food waste grinder ...
NYC Plumbing Code 2008 > 10 Traps, Interceptors and Separators > 1003 Interceptors and Separators > 1003.3 Grease Traps and Grease Interceptors
1003.3.3 Traps, Interceptors and Separators, Grease Interceptors and Automatic Grease Removal Devices Not Required
A grease interceptor or an automatic grease removal device shall not be required for individual dwelling units, any private living quarters, or non ...
NYC Plumbing Code 2014 > 10 Traps, Interceptors and Separators > 1003 Interceptors and Separators > 1003.3 Grease Interceptors > 1003.3.3 Grease Interceptors and Automatic Grease Removal Devices Not Required
1003.3.4 Traps, Interceptors and Separators, Grease Traps and Grease Interceptors
Grease traps and grease interceptors shall conform to PDI G101, ASME A112.14.3 or ASME A112.14.4 and shall be installed in accordance ...
NYC Plumbing Code 2008 > 10 Traps, Interceptors and Separators > 1003 Interceptors and Separators > 1003.3 Grease Traps and Grease Interceptors > 1003.3.4 Grease Traps and Grease Interceptors