// CODE SNIPPET
507.2.9 Grease Gutters for Type I Hood
JUMP TO FULL CODE CHAPTER
Grease gutters shall drain to an approved collection receptacle that is fabricated, designed and installed to allow access for cleaning.
Related Code Sections
507.2.9 Exhaust Systems, Grease Gutters for Type I Hood
Grease gutters shall drain to an approved collection receptacle that is fabricated, designed and installed to allow access for cleaning ...
Mechanical Code 2015 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.2 Type I Hoods > 507.2.9 Grease Gutters for Type I Hood
507.2.9 Exhaust Systems, Grease Gutters for Type I Hood
Grease gutters shall drain to an approved collection receptacle that is fabricated, designed and installed to allow access for cleaning ...
Mechanical Code 2018 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.2 Type I Hoods > 507.2.9 Grease Gutters for Type I Hood
507.2.8 Exhaust Systems, Type I Grease Filters
Type I hoods shall be equipped with grease filters listed and labeled in accordance with UL 1046. Grease filters shall be provided with access ...
Mechanical Code 2015 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.2 Type I Hoods > 507.2.8 Type I Grease Filters
507.2.8.2 Exhaust Systems, Mounting Position of Grease Filters
Filters shall be installed at an angle of not less than 45 degrees (0.79 rad) from the horizontal and shall be equipped with a drip tray beneath ...
Mechanical Code 2015 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.2 Type I Hoods > 507.2.8 Type I Grease Filters > 507.2.8.2 Mounting Position of Grease Filters
507.2.8.2 Exhaust Systems, Mounting Position of Grease Filters
Filters shall be installed at an angle of not less than 45 degrees (0.79 rad) from the horizontal and shall be equipped with a drip tray beneath ...
Mechanical Code 2018 of Utah > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.2 Type I Hoods > 507.2.8 Type I Grease Filters > 507.2.8.2 Mounting Position of Grease Filters